Alrouf LogoAlrouf Electrical Accessories Manufacturer

Electrical Box Sizes Chart: Metal Boxes for Saudi Projects

Choosing the correct electrical box requires more than identifying whether it is a switch box or junction box. The dimensions, depth, steel thickness, conduit entries and internal working space must all suit the intended installation.

An undersized box can make conductor termination difficult, while an unnecessarily large box may increase material cost and complicate coordination with walls, ceilings and other building services. Procurement teams also need accurate model numbers and packing quantities to prepare purchase orders correctly.

This guide presents the available electrical metal box sizes from Alrouf and explains how contractors, MEP engineers and procurement teams can select the appropriate model for Saudi construction projects.

If you need to understand the function of each box before comparing dimensions, start with our guide to the types of electrical boxes used in Saudi projects.

How Are Electrical Box Sizes Measured?

Electrical-box dimensions are normally expressed using three measurements:

Length × width × depth

For example, a box listed as 10 × 10 × 5.5 cm has:

  • A length of 10 cm.
  • A width of 10 cm.
  • A depth of 5.5 cm.

Depth is particularly important because it determines how much internal space is available for conductors, terminals and wiring devices.

However, the external dimensions alone do not confirm that a box is suitable for a particular application. The selection must also consider:

  • The box’s intended function.
  • Number and size of conductors.
  • Conduit diameter.
  • Number and direction of conduit entries.
  • Wiring-device dimensions.
  • Mounting-hole arrangement.
  • Required working space.
  • Cover compatibility.
  • Project specifications.

Alrouf Electrical Metal Box Sizes at a Glance

The available Alrouf range covered in this guide includes switch boxes and junction boxes in several dimensions and depths.

Product familyAvailable dimensionsTypical use
BB6 switch boxes7 × 14 × 3.5 cmSwitches, sockets and wiring devices requiring a shallower box
BB7 switch boxes7 × 14 × 4.7 cmWiring devices requiring additional internal depth
BB8 junction boxes10 × 10 × 5.5 cmCompact conductor junction and branching points
BB9 junction boxes15 × 15 × 5.5 cmMedium junction applications
BB9 deep junction boxes15 × 15 × 10 cmApplications requiring additional internal depth
BB10 junction boxes20 × 20 × 5.5 cmLarger junction and distribution points

The final model must be selected using the approved catalogue and project documents.

BB6 Switch Box Sizes

The BB6 family has external dimensions of:

7 × 14 × 3.5 cm

Its 3.5 cm depth makes it suitable for installations where a shallower switch or socket box is required and the selected wiring device can be accommodated safely.

Available documented BB6 configurations include:

ModelDimensionsSteel thicknessUnit weightEarthing provisionPacking
BB6-0037 × 14 × 3.5 cm0.6 mm109 gConfirm from current submittal50 pieces
BB6-0047 × 14 × 3.5 cm0.6 mm109 gCopper earth50 pieces
BB6-0027 × 14 × 3.5 cm0.9 mm160 gCopper earth50 pieces

Although these models share the same external dimensions, their thickness, weight and earthing configuration may differ. The purchase order should therefore identify the full model code rather than stating only “7 × 14 box.”

When should a 3.5 cm-deep box be considered?

A 3.5 cm-deep box may be considered when:

  • The selected device has a relatively shallow body.
  • The number of conductors is limited.
  • The wall construction restricts installation depth.
  • The approved wiring-device drawing confirms compatibility.
  • The conduit-entry arrangement provides adequate space.

The contractor must check the device dimensions and conductor requirements before approving the shallower box.

BB7 Switch Box Sizes

The BB7 family has external dimensions of:

7 × 14 × 4.7 cm

The additional depth provides more internal space than the BB6 range. This can be useful when the installation includes deeper wiring devices or more conductors.

ModelDimensionsSteel thicknessUnit weightEarthing provisionPacking
BB7-0017 × 14 × 4.7 cm0.9 mm196 gConfirm from current submittal50 pieces
BB7-0027 × 14 × 4.7 cm0.9 mm196 gCopper earth50 pieces
BB7-0037 × 14 × 4.7 cm1.2 mm260 gConfirm from current submittal50 pieces
BB7-0047 × 14 × 4.7 cm1.2 mm260 gCopper earth50 pieces

BB6 vs BB7: What is the difference?

The principal dimensional difference is the box depth:

  • BB6: 3.5 cm deep.
  • BB7: 4.7 cm deep.

The BB7 range provides approximately 1.2 cm of additional depth. This does not automatically make it the correct choice for every installation, but it can provide more working space behind the wiring device.

The decision should account for:

  • Device depth.
  • Conductor quantity.
  • Terminal arrangement.
  • Conduit-entry positions.
  • Wall thickness.
  • Consultant and project requirements.

A deeper box should not be used to compensate for poor conductor arrangement or an incompatible device.

BB8 Junction Box Size

The BB8 junction-box family has dimensions of:

10 × 10 × 5.5 cm

Documented configurations include:

ModelDimensionsSteel thicknessUnit weightEarthing provisionPacking
BB8-00110 × 10 × 5.5 cm0.9 mm298 gConfirm from current submittal50 pieces
BB8-00210 × 10 × 5.5 cm0.9 mm298 gEarth connection provided50 pieces

This compact square format may suit conductor junctions and branch points where the number of conductors and conduit entries can be accommodated within the available internal space.

Before selecting BB8, confirm:

  • Number of incoming and outgoing conduits.
  • Conduit sizes.
  • Conductor quantity and cross-sectional area.
  • Terminal or connector dimensions.
  • Required bend space.
  • Cover type.
  • Accessibility after installation.

BB9 Junction Box Sizes

The BB9 product family includes two depth options.

BB9-001

  • Dimensions: 15 × 15 × 5.5 cm
  • Steel thickness: 0.9 mm
  • Unit weight: 620 g
  • Packing quantity: 20 pieces

This size provides a larger face area than the 10 × 10 cm BB8 box while maintaining a depth of 5.5 cm.

BB9-002

  • Dimensions: 15 × 15 × 10 cm
  • Steel thickness: 0.9 mm
  • Unit weight: 825 g
  • Packing quantity: 12 pieces

The 10 cm depth provides more internal space than BB9-001. It may be considered where the conductor arrangement, fittings or termination method requires additional depth.

ModelDimensionsSteel thicknessUnit weightPacking
BB9-00115 × 15 × 5.5 cm0.9 mm620 g20 pieces
BB9-00215 × 15 × 10 cm0.9 mm825 g12 pieces

The deeper model should still be assessed against the actual conductor and conduit layout. A larger box is not a substitute for an engineered box-sizing calculation where one is required.

BB10 Junction Box Size

The BB10-001 junction box has dimensions of:

20 × 20 × 5.5 cm

Its documented unit weight is:

952 g

This box provides a larger working face and may suit junction points with more conduit entries or a more distributed conductor arrangement.

ModelDimensionsUnit weightPackingSteel thickness
BB10-00120 × 20 × 5.5 cm952 gConfirm from current catalogueConfirm from current catalogue

The steel thickness and packing quantity should be confirmed from the current Alrouf technical documentation before they are included in a purchase order.

Complete Alrouf Electrical Box Size Chart

ModelBox categoryDimensionsThicknessWeightPacking
BB6-003Switch box7 × 14 × 3.5 cm0.6 mm109 g50
BB6-004Switch box with copper earth7 × 14 × 3.5 cm0.6 mm109 g50
BB6-002Switch box with copper earth7 × 14 × 3.5 cm0.9 mm160 g50
BB7-001Deep switch box7 × 14 × 4.7 cm0.9 mm196 g50
BB7-002Deep switch box with copper earth7 × 14 × 4.7 cm0.9 mm196 g50
BB7-003Heavy-gauge deep switch box7 × 14 × 4.7 cm1.2 mm260 g50
BB7-004Heavy-gauge deep switch box with copper earth7 × 14 × 4.7 cm1.2 mm260 g50
BB8-001Junction box10 × 10 × 5.5 cm0.9 mm298 g50
BB8-002Junction box with earth connection10 × 10 × 5.5 cm0.9 mm298 g50
BB9-001Junction box15 × 15 × 5.5 cm0.9 mm620 g20
BB9-002Deep junction box15 × 15 × 10 cm0.9 mm825 g12
BB10-001Large junction box20 × 20 × 5.5 cmConfirm before ordering952 gConfirm before ordering

All dimensions and specifications should be checked against the latest approved catalogue or technical submittal before procurement.

How to Select the Correct Metal Electrical Box Size

Start with the box function

Determine whether the box will be used for:

  • A switch.
  • A socket.
  • A wiring device.
  • Conductor junctions.
  • Circuit branching.
  • A ceiling connection point.
  • Conductor pulling or routing.

The function determines the appropriate box family before dimensions are compared.

Count the conduits

Record the number, diameter and direction of conduits entering the box.

A box may have sufficient overall dimensions but still be unsuitable if the required conduit entries conflict with one another or with the device-mounting position.

Review conductor space

Consider:

  • Number of conductors.
  • Conductor cross-sectional area.
  • Insulation thickness.
  • Connectors or terminals.
  • Bending space.
  • Separation requirements where applicable.
  • Space occupied by the device.

Do not force conductors into a box that does not provide sufficient working space.

Confirm the required depth

Depth is often the deciding factor for switch and socket boxes.

A deeper box may be required for:

  • Deep wiring devices.
  • Multiple conductors.
  • Larger connectors.
  • Conduits entering from several directions.
  • Additional working clearance.

Check mounting compatibility

For switch and socket installations, compare the box dimensions and mounting points with the device manufacturer’s technical drawing.

The labels “single gang,” “double gang” or “multi-module” do not guarantee compatibility across all product systems.

Review the environment

Box selection may also be affected by:

  • Indoor or outdoor installation.
  • Humidity.
  • Dust.
  • Corrosive exposure.
  • Mechanical impact.
  • Concealed or exposed installation.
  • Maintenance accessibility.

A metal or galvanized box should not automatically be described as weatherproof. Any required environmental or ingress-protection rating must be supported by product-specific documentation.

What Should Be Included in the Purchase Order?

A professional purchase order should include more than the generic box name.

For every item, state:

  • Box category.
  • Alrouf model number.
  • External dimensions.
  • Required depth.
  • Steel thickness.
  • Unit weight where required.
  • Earthing configuration.
  • Conduit-entry or knockout requirements.
  • Cover requirements.
  • Packing quantity.
  • Total number of pieces.
  • Project and drawing reference.
  • Required technical documentation.
  • Delivery location and schedule.

Example order description

Alrouf BB7-004 switch box, 7 × 14 × 4.7 cm, 1.2 mm steel thickness, 260 g unit weight, with copper earth, 50 pieces per pack — quantity as stated in the approved material schedule.

Using this level of detail reduces the risk of receiving the correct box dimensions but the wrong thickness or earthing configuration.

Common Mistakes When Comparing Electrical Box Sizes

Avoid the following mistakes:

  • Ordering by dimensions without specifying the model number.
  • Confusing box depth with steel thickness.
  • Assuming identical dimensions mean identical products.
  • Ignoring the wiring-device depth.
  • Failing to confirm conduit-entry positions.
  • Selecting a junction box without considering conductor space.
  • Assuming every box is suitable for outdoor installation.
  • Using unverified catalogue data in a technical submittal.
  • Calculating quantities without considering packing units.
  • Failing to coordinate covers with the selected box.

Frequently Asked Questions

What are the standard electrical metal box sizes?

There is no single size suitable for every application. The Alrouf range covered here includes switch boxes measuring 7 × 14 cm with depths of 3.5 or 4.7 cm, and junction boxes ranging from 10 × 10 × 5.5 cm to 20 × 20 × 5.5 cm.

What is the difference between BB6 and BB7 boxes?

BB6 boxes measure 7 × 14 × 3.5 cm, while BB7 boxes measure 7 × 14 × 4.7 cm. BB7 therefore provides additional internal depth for compatible wiring devices and conductor arrangements.

Which Alrouf junction box is the deepest?

Among the models listed in this guide, BB9-002 has a depth of 10 cm and external dimensions of 15 × 15 cm.

Is a larger junction box always better?

No. A larger box may provide additional space, but it can increase cost and create coordination problems. The correct box should satisfy the conductor, conduit, installation and accessibility requirements without unnecessary oversizing.

Can I select a switch box using the number of gangs only?

No. You should also check the device dimensions, mounting-hole arrangement, box depth, conductor quantity and conduit entries.

Does galvanized steel mean the box can be installed outdoors?

Not automatically. Outdoor suitability and any required ingress-protection rating must be confirmed using product-specific technical documentation.

Should the box weight be included in the purchase order?

Including the documented unit weight can help distinguish between similar models, particularly where the external dimensions are the same but the steel thickness differs.

Conclusion

Selecting the correct electrical metal box size requires coordination between the box function, external dimensions, internal depth, steel thickness, conduit arrangement and wiring device.

The Alrouf range includes:

  • BB6 switch boxes measuring 7 × 14 × 3.5 cm.
  • BB7 switch boxes measuring 7 × 14 × 4.7 cm.
  • BB8 junction boxes measuring 10 × 10 × 5.5 cm.
  • BB9 junction boxes measuring 15 × 15 cm in 5.5 cm and 10 cm depths.
  • BB10 junction boxes measuring 20 × 20 × 5.5 cm.

Contractors and procurement teams should identify the complete model number in every material schedule and verify the latest technical data before placing an order.

Preparing an electrical-box material schedule? Contact Alrouf Electrical Accessories to request the current catalogue, technical information and product availability for your project.

Our PARTNERS

Panda Logo
IKEA Logo
Extra Logo
AL-Drees Logo
ENOC Logo
Alrouf Electrical Accessories Manufacturer
ACCESSORIES is an integral part of ALROUF ELECTRICAL ACCESSORIES MANUFACTURER operates from 2nd Industrial City, Dammam, Saudi Arabia. Nowadays ALROUF is a well-known brand in the steel accessories market. Our modern facility gives us the strength to produce a variety of steel & plastic products in mass production. Our passionate team is our competitive advantage.

Links

Blog
Copyright © Alrouf Electrical . All rights reserved
Web Design KSA By Impressive Sol
linkedin facebook pinterest youtube rss twitter instagram facebook-blank rss-blank linkedin-blank pinterest youtube twitter instagram